- Walls -
Insulate and waterproof your home
A surface treated with ProPERLA Masonry Crème will insulate mineral building materials by reducing water absorption. The product chemically bonds to the surface, penetrating up to 17mm to create an invisible insulation barrier.
ProPERLA Masonry Crème creates an invisible insulation barrier for single skin buildings and those built with a cavity. It has been proven to help retain heat in walls and reduce heat loss.
UKAS accredited tests have demonstrated that by reducing water absorption of the walls, ProPERLA Masonry Crème leads to thermal performance benefits. It has been proven to meet ETAG 004;2011.
Testing in a hygrothermal chamber revealed that a wall coated in ProPERLA Masonry Crème and subjected to repeated heat-rain conditions in accordance with ETAG 034:2012, resulted in reduced heat loss when compared with the uncoated (control) wall. The uncoated wall showed on average an increase of 6⁰C of heat loss in comparison to the walls coated with ProPERLA Masonry Crème.
ProPERLA Masonry Crème improves thermal efficiency and contributes to lower energy consumption and lower energy bills, by keeping walls dry. Damp walls act as ‘thermal bridges’ – enabling heat to transfer from the inside out twice as quickly as it would if the walls remained dry.
Independent testing has shown that ProPERLA Masonry Crème reduces water absorption by 96.3% and meets the British standard for water vapour resistance BS EN ISO 7783:2011.
ProPERLA Masonry Crème benefits from a 20-year manufacturer product guarantee but has been proven to perform for 25 years. When tested under accelerated weathering conditions in accordance with ETAG 034:2012 (which correlates with 25 years in service weathering) there was no deterioration in performance or aesthetic appearance.
ProPERLA Masonry Crème does not restrict the ability of the building to breathe. Water vapour permeability testing was conducted in accordance with BS EN ISO 7783:2011 and it demonstrated that the coating had little effect on the water vapour diffusion of the substrate.
Application of ProPERLA Masonry Crème protects the walls and cavities by keeping them dry whilst allowing air and moisture to escape. It maintains the important capability of the building envelope to breathe. Unlike some stone and brick sealing products, it does not block the pores of the masonry by coating them with a thin film.
A surface is considered super hydrophobic if a water droplet beads up (with a contact angle greater than 140⁰ and the droplets can slide aware from the surface readily (it has a small contact angle hysteresis). Super hydrophobic surfaces repel water, causing it to form beads because it is more attracted to itself than the surface. This means water will run off the surface making it extremely difficult to wet.
This is known as the ‘lotus effect’ due to its similarity to the lotus leaf but is also seen on duck feathers and butterfly wings.
Substrates coated with ProPERLA Masonry Crème will respond in the same way – water will form droplets and won’t penetrate the substrate. Independent testing has shown that it reduces water absorption by 96.3% and meets the British standard for water vapour resistance BS EN ISO 7783:2011.
ProPERLA Masonry Crème has undergone independent tests by UKAS certified body Lucideon and has been proven to meet ETAG and BS EN IOS standards.